Mini Smart Home WIFI Amplifier With TUYA Hardware Parameters:
● Capacitance Full Screen Touch
● 4-inch IPS Display, 480*480 Resolution
● Android 11 System, 1+8G

●4 Core Processor, Cortex 1.2G CPUCS8618C amplifier chip
● Power Supply Mode: AC 110-250VC
● Output Power: 2*20W with RJ45 port /  4*20W(without RJ45 port)
● Output Impedance: 4-8Ω
● Audio Inputs; Output
● Network: Support 2.4G+5G WIFI
● Installation: 86 standard wire box, front wall
● Bluetooth: Two way Bluetooth
● Support TF card not exceed 32GB can be read
● OTGUSB disk not exceed 32GB USB2.0 can be read
● Frequency Response: 20Hz-20KHz
● Total Harmonic Distortion: 0.03%(1W,1KHz)
● Audio S/N: 96dB
● Product Size: 86*86*11MM
● Wire Box Opening Size: 86*86*57MM
● Feature: support TUYA,Google Play Store,Youtube ,E-share,TikTok, Spotify, BluetoothPlay, Go Keyboard, Pandora, etc.

M2Specification:

● 2'' Full range speaker drive

● Moisture-proof plastic ceiling speaker with cover

● Power: 5W/8Ω

● Sensitivity: 88dB

● Plastic case with rear cover

● Installation Cutout Size: Φ87mm

● Product Size: Φ100x76mm

● Net Weight: 310g

● Gross Weight: 400g

AMPLILER

1 x wall amplifier device
1 x remote control
1 x mounted box
1 x bracket and screw 

● Languages only support English and Chinese, please check before your purchase.

● Note : not all tuya devices can be controlled.

   Firstly, the controlled device must have tuya function.

   Only the following Tuya devices are controlled

  Switch, Turn off switch , On-off device, RGB light, light belt

   socket ,curtain,Air conditioning controller , Temperature controller
● For this device, can connect the maximum 2pcs or 4pcs 8ohm RMS 20W speakers and 8ohm (it's the best impedance).

● For this device, speaker cable and power cable is not included. 
① Use exceed 150-core pure copper speaker cable to connect speakers.
② Use power cable cord as the amplifier request (two cord).
● If there is any questions about the product or you need our technical support, please contact us.